AT&T MERLIN LEGEND Installation & Maintenance Manual page 317

Programming Procedures
Step
8. Assign or remove
line/trunk from group
To assign line/trunk to
group
To remove line/trunk
from group
Note: An alternate method for steps 7 and 8 is to select Entry
Mode (F6), identify the line/trunk (dial or type line/trunk number
or logical ID), and select Enter (F10) or Next (F9) to assign the
line/trunk to the group, or select Delete (F8) to delete the
line/trunk from the group.
9. When all entries are
complete
Console
Press line
button for each
line/trunk to turn
green LED on
Press line
button for each
line/trunk to turn
green LED off
Exit
Exit
Exit
Exit
PRI Facilities
PC
Press function
key for each
line/trunk to
make letter "G"
appear on
screen
Press function
key for each
line/trunk to
erase letter "G"
F5
F5
F5
F5
4-75