AT&T MERLIN LEGEND Installation & Maintenance Manual page 634

General Telephone Programming
c. Press the button you labeled again to continue
programming.
Note: If the currently programmed feature was not deleted
from the button, the new feature programmed onto it will
replace it.
d. Select List Feature [List] from the display.
The screen lists feature names.
4. Find the feature you want by doing one of the following:
If the feature name is on the display, press the button next
to or below the name of the feature to be programmed.
If the feature name is not on the display, do one of the
following:
— To move through the list of features page by page
press More.
— To jump to the screen that displays the feature name,
select Find Feature [Find] from the display.
Select the range of letters from the display that
corresponds to the first letter of the feature name (for
example, if the feature begins with A, select ABC). If
the feature is not displayed on the page that you
jumped to, press More.
5. When you find the feature you want, press the button next to
or below it.
6. Respond to any additional prompts on the display.
Select the appropriate choice (for example, select On or
Off to turn Inside Coverage on or off).
Enter required information (for example, dial a phone
number for Auto Dial).
E-6 General Telephone Programming