Isdn 7500B Data Module Option Settings For Analog-To-Digital Modem Pool Operation - AT&T MERLIN LEGEND Installation & Maintenance Manual

Installation
Type "ATQ0" and press Enter. Option set: enable result
codes (factory setting).
Type "AT&W" and press Enter to write options to protected
memory.
Analog-to-Digital Modem Pool Option Settings
Data Module Option Settings. Use the following procedure to
prepare the ISDN 7500B Data Module for operation in an analog-
to-digital modem pool:
1. Use the instructions provided in the 7500B user manual to set
the DCE/DTE flip board to the DTE position.
2. Use the front panel controls on the 7500B data module to set
the options on the display (see Table 3-30). See the ISDN
7500B Data Module user's manual for detailed information on
using the front panel controls and the meaning for each
option.
Table 3-30 ISDN 7500B Data Module Option Settings for
Analog-to-Digital Modem Pool Operation
Position No.: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
L 1 :
L 2 :
b= blank, L = Line #
Modem Option Settings. The following procedure is one
method to prepare the AT&T model 2224G modem for operation
in an analog-to-digital modem pool. This procedure is only a
recommended method and may be different if you are using
another type of modem.
1. Connect a data terminal such as a PC to the modem and plug
both the modem and data terminal into an AC outlet.
3-74 Data Adapters
3 3 3 0 1 0 b 0 0 1 0 1 0
1 0 0 0 3 1 0 0 0 0
0 1 1