Defining Ip Networks - Altigen AltiWare ACM 5.2 Administration Manual

Chapter 25: Enterprise VoIP Network Management
To set the codec for a connection among AltiGateways in the same
AltiWare server
1. Select a server in the Global Server Location list on the left side of the window.
2. In the Codec field, select the codec to use for a connection to this server from the
drop-down list.

Defining IP Networks

If your server is behind NAT or you need to regulate WAN VoIP sessions, you need to do
some configuring on the IP Networks tab in AltiEnterprise Manager.
The tab allows you to specify the following three items for a single server or for member
servers in the VoIP domain:
How many VoIP sessions to allow through Public Pipe
•
How many VoIP sessions to allow through Intranet Pipe
•
NAT support when the server is behind a NAT router
•
The Public Pipe is the WAN connection to the public Internet, including IP-VPN over
WAN.
The Intranet Pipe is the enterprise WAN connection, for example, Frame Relay.
The VoIP connections through public or enterprise WAN will work without
Note:
configuring the IP Networks tab. However, if the total number of VoIP
connections exceeds the WAN bandwidth, the voice quality will be affected for all
connections. It is recommended that you set a limit based on the WAN bandwidth
to ensure the voice quality.
To configure IP networks, click the IP Networks tab.
320
AltiWare ACM 5.2 Administration Manual