Monitoring Audio Sound During Recording Using A Headphone - JVC GY-HM600U Instruction Manual

Monitoring Audio Sound
During Recording Using a
Headphone
You can check the recorded audio using
headphone.
2 3
MONITOR
CH1
BOTH
CH2
.
1 Connect the headphone.
2 Select the channel to monitor with the
[MONITOR] selection switch.
Setting
[CH1] Outputs the audio recorded in [CH1].
[BOTH] Outputs the audio recorded in
[CH1/CH2].
[CH2] Outputs the audio recorded in [CH2].
3 Use the [MONITOR +/-] button to adjust the
monitor volume.
Memo :
Audio during recording is not output from the
0
monitor speaker.
Warning tone is output when there is an
0
abnormality in the camera recorder or when the
battery is low.
(A P130 [Warning Tone] )
1
Description
Selecting Audio Output Method When the
[MONITOR] Selection Switch Is Set to
"BOTH"
When a stereo type earphone jack is connected,
perform the following setting to output stereo
sound.
1 Set the [MONITOR] selection switch to "BOTH".
2 Set [Main Menu] B [A/V Set] B [Audio Set] B
[Monitor] to "Stereo".
(A P103 [ Monitor ] )
Memo :
You can set the volume of the warning tone in
0
[Main Menu] B [A/V Set] B [Audio Set] B [Alarm
Level]. ("Off"/"Low"/"Middle"/"High")
(A P103 [ Alarm Level ] )
59