A/V Set Menu; Video Set Item - JVC GY-HM600U Instruction Manual

A/V Set Menu

Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
(A P101 [Video Set Item] )
Audio Set...
For specifying audio-related settings.
(A P102 [Audio Set Item] )

Video Set Item

Display On TV
For setting whether to display the display and menu
characters on the external monitor.
[Setting Values: On, ROff]
HDMI/SDI Out
For setting the terminal to output the video.
[Setting Values: HDMI+SDI, SDI, HDMI, ROff]
9 Resolution
For selecting the resolution of video output from the
[HDMI]/[SDI] terminal according to the monitor to
be connected.
[Setting Values: 576i, 576p, 480i, 480p, 720p,
R1080i]
Memo :
The selectable options vary according to the
0
setting in [System]/[Resolution]/[Frame & Bit
Rate] of [System] menu B [Record Set] B
[Record Format].
Cross conversion output is not possible.
0
9 HDMI Color
For setting the color format of HDMI signals.
0
This item is selectable only when [HDMI/SDI
0
Out] is set to "HDMI" or "HDMI+SDI".
[Setting Values: RGB, RAuto]
9 HDMI Enhance
For setting the color range of HDMI signals.
0
When connecting to a PC monitor, set this to
"On".
This item is selectable only when [HDMI/SDI
0
Out] is set to "HDMI" or "HDMI+SDI".
[Setting Values: On, ROff]
SD Aspect
For setting the style of displaying down-converted
images on a 4:3 aspect ratio screen.
Side Cut:
0
Displays image with the left and right sides cut
off.
Letter:
0
Displays as a wide image with the top and
bottom blackened.
Squeeze:
0
Displays image that is squeezed horizontally.
[Setting Values: Side Cut, Letter, RSqueeze]
Memo :
When [System] in the [Record Format] menu is
0
set to "SD" and [SD Aspect] is set to "4:3", this
item appears as "---" and cannot be selected.
(A P105 [ System ] )
SD Set Up
For selecting whether to add a setup signal to the
video signal output from the [AV] output terminal.
Setup signals are added when "7.5%" is selected.
[Setting Values: 7.5%, 0.0%]
(Default values: 7.5% (U model), fixed at "0.0%" (E
model))
Memo :
Depending on the menu settings of the camera
0
recorder and the condition of the cable
connected to it, the setup signal setting may be
fixed at "0.0%". "0.0%" is displayed in gray in this
case.
101