JVC GY-HM600U Instruction Manual page 106

9 Frame & Bit Rate
For setting the frame rate and encoding bit rate
when [System] is set to "HD".
The selectable options vary according to the
[Resolution] setting.
When "1920x1080" ([Format] is set to "AVCHD")
0
is selected:
[Setting Values: 60i(HQ), 50i(HQ), 60i(SP),
50i(SP)]
(Default values: 60i(HQ) (U model), 50i(HQ) (E
model))
When "1920x1080" ([Format] is set to other than
0
"AVCHD") is selected:
[Setting Values: 60i(HQ), 30p(HQ), 24p(HQ),
50i(HQ), 25p(HQ)]
(Default values: 60i(HQ) (U model), 50i(HQ) (E
model))
When "1440x1080" is selected:
0
[Setting Values: 60i(HQ), 50i(HQ), 60i(SP),
50i(SP)]
(Default values: 60i(HQ) (U model), 50i(HQ) (E
model))
When "1280x720" is selected:
0
[Setting Values: 60p(HQ), 30p(HQ), 24p(HQ),
50p(HQ), 25p(HQ), 60p(SP), 50p(SP)]
(Default values: 60p(HQ) (U model), 50p(SP) (E
model))
Memo :
When [System] is set to "SD", this item is fixed
0
as follows for the different models.
U model: "60i"
0
E model: "50i"
0
9 SD Aspect
For setting the aspect ratio of the recorded image
when [System] is set to "SD".
[Setting Values: R16:9, 4:3]
Memo :
When [System] is set to "HD", this item is fixed
0
at "16:9".
Rec Mode
For selecting the record mode for recording to
0
the SD card.
(A P73 [Special Recording] )
The selectable options vary according to the
0
[Record Format] menu settings.
106
Format Frame & Bit Rate Setting values
MP4 30p(HQ),
(MPEG2) 24p(HQ),
QuickTime 25p(HQ)
(MPEG2)
60i(HQ), 50i(HQ),
60i(SP), 50i(SP),
60p(HQ),
60p(SP),
50p(HQ),
50p(SP)
AVCHD 60i(HQ), 50i(HQ),
60i(SP), 50i(SP)
QuickTime 60i (U model)
(H.264) 50i (E model)
Memo :
When [Slot Mode] is set to "Backup", this item is
0
fixed at "Normal".
[Variable Frame Rate] is enabled when
0
[Resolution] is set to "1920x1080" or "1280x720",
and [Frame & Bit Rate] is set to "30p(HQ)",
"24p(HQ)", or "25p(HQ)".
9 Pre Rec Time
For setting the pre-recording time when [Rec
Mode] is set to "Pre Rec".
[Setting Values: R5sec, 10sec, 15sec]
9 Rec Frames
For setting the number of frames to record when
[Rec Mode] is set to "Frame Rec" or "Interval Rec".
[Setting Values: R1frame, 3frames, 6frames]
9 Rec Interval
For setting the recording time interval when [Rec
Mode] is set to "Interval Rec".
[Setting Values: R1sec, 2sec, 5sec, 10sec, 30sec,
1min, 2min, 5min, 10min, 30min, 1hour]
Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec,
Variable Frame
Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec
Normal, Pre
Rec, Interval
Rec, Frame Rec
Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec