JVC GY-HM600U Instruction Manual page 114

M Gain
Displays the gain value.
0
a is displayed in the ALC mode during
0
Manual shooting.
Z is displayed when AE LOCK is set to "ON".
0
"LUX30" or "LUX36" is displayed when in the
0
low-light shooting mode.
Memo :
Displayed in the Display 0 screen only when
0
there is a change.
N AE Level
Appears when the AE function is activated
0
and [AE Level] in the [Main Menu] B
[Camera Function] menu is set to a value
other than "Normal".
(A P90 [ AE Level ] )
When operated while manual operation is
0
disabled, "AE" blinks for about 5 seconds.
When face detection is enabled and [Face
0
Detect] is set to "AF&AE", q appears on the
left side of "AE".
(A P46 [Adjusting the Focusing by Face
Detection] )
O ND Filter Position
Displays the current ND filter position.
Memo :
This item is not displayed when [Main Menu] B
0
[LCD/VF] menu B [Display Settings] B [ND
Filter] is set to "Off".
(A P99 [ ND Filter ] )
Displayed in the Display 0 screen only when
0
there is a change.
P Focus Display
Displays the value of the focal length during
0
manual focus.
e is displayed during Auto Focus.
0
When face detection is enabled, q appears
0
on the left side of e.
(A P46 [Adjusting the Focusing by Face
Detection] )
(A P92 [ Face Detect ] )
114
Memo :
You can specify whether to display the focus
0
value ("Feet"/"Meter") or turn off the display in
[Main Menu] B [LCD/VF] menu B [Display
Settings] B [Focus].
This item will not be displayed when "Off" is
selected.
(A P99 [ Focus ] )
Displayed in the Display 0 screen only when
0
there is a change.
Q Focus Assist
"FOCUS" is displayed when auto focus is
0
activated.
When ACCU-Focus is enabled, "ACCU-
0
FOCUS" blinks for about 10 seconds while
Focus Assist starts up, after which the
"FOCUS" indicator lights up.
If recording starts while [ACCU-Focus] is
0
active, [ACCU-Focus] will be forcibly
deactivated.
(A P98 [ Focus Assist ] )
Memo :
Displayed in the Display 0 screen only when
0
there is a change.
R Luminance Information
Displayed when the Spot Meter function is
activated.
(A P66 [Setting Spot Meter] )
MAX : Maximum luminance
MIN : Minimum luminance
S Date/Time Display
Displays the current date and time.
Memo :
The date/time display style can be specified in
0
[Main Menu] B [LCD/VF] menu B [Display
Settings] B [Date Style]/[Time Style].
(A P100 [ Date Style ] )
(A P100 [ Time Style ] )
This item is not displayed when [Main Menu] B
0
[LCD/VF] menu B [Display Settings] B [Date/
Time] is set to "Off".
(A P100 [ Date/Time ] )
When [Main Menu] B [System] menu B [Record
0
Set] B [Time Stamp] is set to "On", this item is
not displayed.
(A P107 [ Time Stamp ] )