Detail/Adjust Item - JVC GY-HM600U Instruction Manual

Color Gain
For adjusting the video signal color level.
Increasing the value deepens the color.
[Setting Values: -50 to +15, Off (R0)]
Memo :
Images are displayed in black-and-white when
0
this is set to "Off".
Reverse Picture
For recording images correctly by setting this item
to "Rotate" when the lens image appears upside
down or laterally inverted.
Rotate:
0
Enables horizontal/vertical inversion of the
image.
Off:
0
Disables horizontal/vertical inversion of the
image.
[Setting Values: Rotate, ROff]
Reset Process
Restores all items in the [Camera Process] menu
to their default settings.

Detail/Adjust Item

V/H Balance
For setting the H/V balance to enhance contour
(detail) in the horizontal (H) or vertical (V) direction.
H+1 to H+4:
0
Increasing the value enhances contour in the
horizontal direction.
V+1 to V+4:
0
Increasing the value enhances contour in the
vertical direction.
[Setting Values: H+1 to H+4, RNormal, V+1 to V+4]
Memo :
When [System] under [Record Format] is set to
0
"SD", this item is fixed at "Normal".
H Frequency
For specifying the correction frequency of the
horizontal contour. Set this according to the object.
High:
0
Emphasizes the high frequency range. Use this
when shooting objects with fine patterns.
Middle:
0
Emphasizes the intermediate frequency range.
Low:
0
Emphasizes the low frequency range. Use this
when shooting objects with large patterns.
[Setting Values: High, RMiddle, Low]
Memo :
When [System] under [Record Format] is set to
0
"SD", this item is fixed at "Low".
V Frequency
For specifying the correction frequency of the
vertical contour. Set this according to the object.
Low:
0
Emphasizes the low frequency range.
Middle:
0
Emphasizes the intermediate frequency range.
High:
0
Emphasizes the high frequency range.
[Setting Values: Low, RMiddle, High]
Memo :
When [System] under [Record Format] is set to
0
"SD", this item is fixed at "Low".
(A P105 [ Record Format ] )
"High" cannot be selected under the following
0
settings.
When [Resolution] is set to "1920x1080", and
0
[Frame & Bit Rate] is set to "60i(HQ)" or
"50i(HQ)".
When [Resolution] is set to "1440x1080", and
0
[Frame & Bit Rate] is set to "60i(HQ)",
"50i(HQ)", "60i(SP)" or "50i(SP)".
Skin Detail
For turning On/Off the Skin Detail function, which
is used to adjust the contour correction effect of the
colors captured.
Select "On" to soften the detail at areas where skin
tone is detected.
[Setting Values: On, ROff]
9 Level
For setting the level of contour correction (degree
of softening) using the Skin Detail function.
Decreasing the value increases the level of contour
correction (degree of softening).
[Setting Values: -1, R -2, -3]
9 Range
For adjusting the range of skin tone to trigger the
Skin Detail function.
Increasing the value increases the range.
[Setting Values: -5 to +5 (R0)]
95