Configuring Setup Files; Saving Setup Files - JVC GY-HM600U Instruction Manual

Configuring Setup Files

The menu settings can be stored on the camera
recorder or an SD card by saving them as a setup
file.
Loading a saved setup file enables you to
reproduce the appropriate setup state speedily.
Two types of setup files are available.
o Scene file:
File that contains all menu settings, ranging from
video format settings to image creation settings
such as device settings and shooting conditions,
as well as the contents of the [Favorites Menu].
o Picture file:
File that contains image creation settings in
accordance to the shooting conditions ([Camera
Process] menu items).
(A P92 [Camera Process Menu] )
Memo :
Make use of the [Setup File] menu to save or
0
load a setup file.
The following operations can be performed on
0
the [Setup File] menu.
([Saving Setup Files] P 121)
0
([Loading a Setup File] P 122)
0
([Deleting Setup Files] P 123)
0
Number of Storable Setup Files
Camera recorder : [CAM1] to [CAM4]
SD slot A : [ W 1 ] to [ W 8 ]
SD slot B : [ Y 1 ] to [ Y 8 ]
Compatibility
o Scene file
Only scene files of the GY-HM600 and
0
GY-HM650 series can be loaded.
When the scene files saved using GY-HM650
0
are loaded, the functions that only exist on
GY-HM650 are ignored.
o Picture file
Only picture files of the GY-HM600 and GY-HM650
series can be loaded.

Saving Setup Files

1 Display the [Setup File] menu.
Select [Main Menu] B [System] B [Setup File]
and press the Set button (R).
(A P104 [ Setup File ] )
2 Select [Store File] and press the Set button (R).
3 Select [Scene File] or [Picture File], and press
the Set button (R).
The existing files are displayed.
4 Select the file to be newly saved (or overwritten)
using the cross-shaped button (JK), and press
the Set button (R).
.
Memo :
Files cannot be written in the following cases.
0
(Displayed in gray, selection disabled)
When the inserted SD card is not supported or
0
not formatted. (File name appears as "---".)
When a write-protected SD card is inserted
0
(a z mark appears beside the SD card icon).
5 Name the file.
Enter the subname using the software
0
keyboard.
(A P88 [Text Input with Software Keyboard] )
You can enter up to 8 characters for the
0
[Store File]/[Picture File] subname.
Memo :
When overwriting an existing file, the subname
0
of the existing file is displayed.
Select [Cancel] and press the Set button (R), or
0
press the [CANCEL] button to return to the
previous screen.
4
121