JVC GY-HM600U Instruction Manual page 62

2 Set the time code (hour, minute, second,
frame).
Use the cross-shaped button (HI) to place the
cursor at the item to set, then use the cross-
shaped button (JK) to change the values.
During drop frame
.
Memo :
Press the [OIS/2] button to reset each digit to "0".
0
The cursor moves to the time digit (left).
3 Check the values and press the Set button (R).
The time code is set and the screen returns
0
to [TC/UB].
To cancel the setting, press the [CANCEL]
0
button.
4 Press the [MENU] button.
Returns to the normal screen.
Presetting the User's Bit
You can add an 8-digit hexadecimal number as the
user's bit to the recorded image.
MENU/THUMB
AE LEVEL
CANCEL
.
62
Cursor
During non-drop
frame
MENU/THUMB
CANCEL
OIS / 2 LOLUX / 3
1 Select [Main Menu] B [TC/UB] B [UB Preset]
and press the Set button (R).
(A P97 [ UB Preset ] )
The [UB Preset] setting screen appears.
.
Memo :
When [TC/UB] B [TC Generator] is set to
0
"Regen", the parameter is displayed as "Regen"
and cannot be selected.
(A P96 [ TC Generator ] )
2 Use the cross-shaped button (HI) to place the
cursor at the item to set, then use the cross-
shaped button (JK) to change the values.
Numbers between 0 and 9 or alphabets
between A and F can be specified for the user's
bit.
.
Memo :
Press the [OIS/2] button to reset each digit to "0".
0
The cursor moves to the left.
3 Check the values and press the Set button (R).
The time code is set and the screen returns
0
to [TC/UB].
To cancel the setting, press the [CANCEL]
0
button.
4 Press the [MENU] button.
Returns to the normal screen.
1
Cursor