Connecting External Monitor - JVC GY-HM600U Instruction Manual

Connecting External
Monitor
To output live or playback video images and
0
audio sound to an external monitor, select the
output signals from the camera recorder, and
connect using an appropriate cable according to
the monitor to be used.
Choose the most suitable terminal according to
0
the monitor in use.
[HD/SD SDI] terminal:
0
Outputs either the HD-SDI signal or SD-SDI
signal.
[AV] terminal:
0
Outputs composite video and audio signals.
[HDMI] terminal:
0
Outputs HDMI signals.
Configure the settings in the [A/V Set] menu to
match the monitor to be connected.
(A P101 [ HDMI/SDI Out ] )
Clamp Filter
(supplied)
Wire Clamp
(supplied)
AV input
.
126
DEVICE
AV
REMOTE
DC
SDI IN
HDMI
* Select the output signal using [HDMI/SDI Out] in
the [A/V Set] menu.
(A P101 [ HDMI/SDI Out ] )
* When [System] in the [Record Format] menu is
set to "SD", only SD-SDI signals are output.
(A P105 [ System ] )
* To display menu screen or display screen on the
external monitor, set [Display On TV] in the [A/V
Set] B [Video Set] menu to "On".
(A P101 [ Display On TV ] )
Connecting via SDI
Digital video signals, together with embedded
0
(superimposed) audio signals and time code
signals, are output for both the HD-SDI and SD-
SDI signals.
User's bit output from the [HD/SD SDI] output
0
terminal is used as a flag to determine valid
video signals. Therefore, accurate values will
not be output.
Memo :
The sampling frequency for embedded
0
(superimposed) audio signals is 48 kHz. Time
code of the built-in time generator as well as
playback time code are also output.
Settings for SDI Down-Converted Output
You can select the method to "down convert" HD
0
video images to SD images during SD-SDI
output.
Set using [A/V Set] B [Video Set] B [SD
0
Aspect].
The available modes include "Side Cut", "Letter"
0
(blackened at the top and bottom), and
"Squeeze" (full size, compressed at the left and
right).
(A P106 [ SD Aspect ] )
Memo :
When [System] in the [Record Format] menu is
0
set to "SD" and [SD Aspect] is set to "4:3", this
item cannot be selected.
(A P105 [ System ] )