Setting The Nd Filter; Adjusting The White Balance - JVC GY-HM600U Instruction Manual

Automatic Shutter Mode (Automatic Shutter
Adjustment)
1 Press the [SHUTTER] button or set the [FULL
AUTO] switch to "ON" to enter Automatic
Shutter mode.
The a icon appears on the screen.
0
The camera recorder enters the automatic
0
shutter adjustment mode. The shutter speed
is automatically adjusted according to the
brightness of the object.
Memo :
Switching of shutter speed with the cross-
0
shaped button (JK) and switching of shutter
mode with the Set button (R) are disabled.

Setting the ND Filter

Use the ND filter to keep the lens aperture in the
appropriate range.
Switch according to the brightness of the object.
When the position on the switch is changed, the
selected position of the ND filter is displayed on the
LCD monitor and viewfinder screen.
(Display 2 screen)
Memo :
When [Main Menu] B [LCD/VF] B [Display
0
Settings] B [ND Filter] is set to "Off", the position
of the ND filter will not be displayed.
(A P99 [ ND Filter ] )
.
4030 20 10 0
P 13000K
.
ND FILTER
1/64
1/16
1/4
OFF
00: 00: 00.00
Jan 24 ,2012
12 :34 : 56
ND 1 /64
5 . 6f t
ND 1 /64
AE 6
+
0
dB
F1.6
1/ 100
Memo :
It is recommended to use the ND filter to set the
0
lens aperture to less than F8.
Adjusting the White
Balance
Adjust the white balance according to the color
temperature of the lighting. You can select the
adjustment mode according to the shooting
conditions.
As the color of the light (color temperature) varies
according to the light source, it is necessary to
readjust the white balance when the main light
source illuminating the object changes.
WHT BAL SHUTTER
B
A
PRESET
.
Manual White Balance Mode (Manual
Switching)
1 Press the [WHT BAL] button to set to Manual
White Balance mode.
You can select the white balance with the
0
[WHT BAL B/A/PRESET] selection switch.
Use the [WHT BAL B/A/PRESET] selection
0
switch to select "PRESET" (preset mode),
"A" (memory A mode), or "B" (memory B
mode).
The value assigned to the switch appears on
0
the screen.
Memo :
This is fixed at "FAW" when the [FULL AUTO]
0
switch of the camera recorder is set to "ON".
FULL AUTO
ON
OFF
53