Camera Function Menu - JVC GY-HM600U Instruction Manual

Camera Function Menu

Menu screen for specifying operation settings
during shooting.
This item can only be selected in the Camera
mode.
Bars
For setting whether to output color bars.
[Setting Values: On, ROff]
Memo :
The audio test signals (1 kHz) can be output
0
simultaneously with the color bar output.
(A P103 [ Test Tone ] )
OIS
For setting whether to enable image stabilizer.
When "On" is selected, set the Level.
[Setting Values: On, ROff]
9 Level
For setting the level of the image stabilizer.
[Setting Values: High, RNormal]
Memo :
When "High" is selected, correcting severe
0
camera shake may cause the area surrounding
the image to darken.
Flicker Correction
For setting whether to adjust image flicker that
occurs under a fluorescent light.
[Setting Values: On, ROff]
90
Shutter
For specifying shutter-related settings.
Use this item to set to "Step" (fixed value) or
"Variable" when operating with the cross-shaped
button (JK) on the right side.
Variable:
0
Sets to variable scan. Use this setting such as
when shooting a PC monitor.
Step:
0
Sets to step shutter, which switches the shutter
speed by a fixed value.
[Setting Values: Variable, RStep]
AE Level
For setting the convergence level during AE (Auto
Exposure).
This can also be adjusted using the cross-shaped
button (HI) on the right side.
[Setting Values: -6 to +6 (R0)]
AE Speed
For setting the convergence speed during AE (Auto
Exposure).
[Setting Values: RFast, Middle, Slow]
ALC Limit
For setting the maximum gain value of "ALC",
which electrically boosts the sensitivity level
according to the brightness automatically.
[Setting Values: 24dB, R18dB, 12dB, 6dB]
Auto Iris Limit (OPEN)
For setting the limit value of the OPEN end when
auto iris is enabled.
[Setting Values: F5.6, F4, F2.8, F2, RF1.6]
Auto Iris Limit (CLOSE)
For setting the limit value of the CLOSE end when
auto iris is enabled.
[Setting Values: F11, RF8, F5.6]