Error Messages And Actions - JVC GY-HM600U Instruction Manual

Error Messages and Actions

Warning display on the LCD monitor and viewfinder screen, tally lamp indication and warning tone are as
follows according to the error status.
Memo :
This camera recorder makes use of a microcomputer. Noise interference from external sources may
0
prevent it from functioning properly. When this occurs, turn off and on the power of the camera recorder
again.
Error Message
Thumbnail
Display Screen
TURN POWER
OFF
TURN BACK ON
LATER
FAN STOP
DETECTED
PLEASE TURN
P.OFF
FAN
MAINTENANCE
REQUIRED
－
Overheated.
Please Turn
Power Off.
REC INHIBITED
128
Screen
Dedicated
Screen
- System error.
* The warning tone sounds and the
tally lamp blinks twice every
second.
- The fan stopped running.
0
The power turns off
0
automatically after about 1
second.
- Usage time of the fan has exceeded
9000 hours.
Getting The battery has exceeded the
0
specified temperature.
The power turns off
0
automatically after about 15
second.
－
[REC] button is pressed when the
write-protect switch of the SD card
is set.
Status
Turn off the power, and turn it
on again.
If the error persists, consult
your nearest JVC dealer.
Please consult your nearest
JVC dealer.
Check the fan and replace
accordingly. For more details,
please consult your nearest
JVC dealer.
Memo :
Turn off the write-protect
switch of the SD card, or
insert a recordable SD card.
Action
You can check the usage
0
time of the fan in the
[System] menu B
[System Information] B
[Fan Hour].
(A P105 [ Fan Hour ] )
Wait until the temperature
0
drops or replace the
battery.
If the error persists,
0
consult your nearest JVC
dealer.
(A P37 [SD Card] )