Record Set Item - JVC GY-HM600U Instruction Manual

Reset All
Resets all menu settings.
Memo :
[Date/Time] and [Time Zone] cannot be reset.
0
(A P105 [ Date/Time ] )
(A P105 [ Time Zone ] )
This item is not selectable when recording in
0
Camera mode, during Clip Review, and in Media
mode.
Date/Time
For setting the year, month, day, hour, and minute.
Memo :
The display order of the date (year, month, and
0
day) follows the [Date Style] setting in the
[Display Settings] menu. However, the 24-hour
format is used for the hour display regardless of
the [Time Style] setting.
(A P100 [ Date Style ] )
Time Zone
For setting the UTC time difference in units of 30
minutes.
[Setting Values: UTC-00:30-UTC-12:00, UTC,
UTC+14:00-UTC+00:30 (in 30 min increments)]
(Default values: UTC-05:00 (U model), UTC (E
model))
Memo :
If [Date/Time] is already set, the [Date/Time]
0
item is automatically adjusted when [Time
Zone] is altered.
System Information
9 Version
Displays information on the firmware version.
9 Fan Hour
For displaying the usage time of the internal fan.
Memo :
Under normal environment, dust will
0
accumulate on the internal fan when the camera
recorder is used over a long period. Dust may
enter the camera recorder especially if it is used
outdoors. This may affect the image and sound
quality of the camera recorder. Check and
replace the fan after every 9000 hours
(suggested guideline).

Record Set Item

Record Format
After setting of all items in the [Record Format]
menu is complete, select [Set] at the bottom of the
screen to apply the new settings on the camera
recorder and switch the record format. A "Please
Wait..." message appears during switching.
9 System
For selecting a system definition.
Select whether to record in "HD" (High Definition)
or "SD" (Standard Definition).
[Setting Values: RHD, SD]
Caution :
The selectable options for the [Format],
0
[Resolution], and [Frame & Bit Rate] settings
vary depending on the setting of this item.
9 Format
For selecting the format of the file to be recorded to
the SD card when [System] is set to "HD".
[Setting Values: RQuickTime(MPEG2),
MP4(MPEG2), AVCHD]
Memo :
When System is set to "SD", this item is fixed at
0
"QuickTime(H.264)".
9 Resolution
For setting the size of the recorded image when
[System] is set to "HD". (Horizontal x vertical)
The available options vary according to the
[Format] and [System] settings.
When MP4(MPEG2) or QuickTime(MPEG2) is
0
selected:
[Setting Values: R1920x1080, 1440x1080,
1280x720]
When AVCHD is selected: fixed at
0
"1920x1080"
Memo :
When [System] is set to "SD", this item is fixed
0
at "720x480".
The selectable values of [Frame & Bit Rate] vary
0
according to the setting of this item.
105