Initial Settings - JVC GY-HM600U Instruction Manual

Initial Settings

When the power is first turned on, the Initial Setting
screen for performing the initial settings in the
camera recorder appears.
Set the date/time of the built-in clock in the [Initial
Setting] screen.
All operations are disabled until initial settings are
complete.
MENU/THUMB
AE LEVEL
CANCEL
.
Memo :
It is recommended to use the AC adapter as the
0
power supply.
Be sure to close the lens cover.
0
1 Hold down the lock button (blue) at the center of
the [POWER ON/OFF(CHG)] switch to set to
"ON".
The Initial Setting screen appears.
.
30
2 Ensure that the lens cover is closed, and press
the Set button (R).
MENU/THUMB
CANCEL
POWER
ON
OFF
(CHG)
MODE
.
Memo :
It takes about 6 minutes to complete the
0
diagnosis. During the diagnosis, do not operate
or turn off the camera recorder.
3 Press the Set button (R) after confirming the exit
screen.
The [Initial Setting] screen appears.
.
.
Self-diagnosis starts.
0
A progress bar appears, and "Complete
0
Diagnosis" appears when the diagnosis is
complete.
For GY-HM600U
0
For GY-HM600E
0