Focus Operation - JVC GY-HM600U Instruction Manual

Using Zoom Ring at the Lens Section
1 Set the [ZOOM SERVO/MANUAL] switch to
"MANUAL".
You can adjust the preferred angle of view by
turning the zoom ring.
Saving/Recalling Current Zoom
Position (Preset Zoom)
This allows you to register up to three zoom
positions.
1 Assign the "Preset Zoom1", "Preset Zoom2", or
"Preset Zoom3" function to any of the user
buttons.
(A P36 [Assigning Functions to User Buttons] )
(A P91 [USER1 - USER7, LCD KEY▲/LCD
KEY▶/LCD KEY▼/LCD KEY◀] )
2 Save the current zoom position.
Press any of the buttons assigned with the
0
"Preset Zoom1", "Preset Zoom2", or "Preset
Zoom3" function for more than 1 second.
The current zoom position will be stored.
0
3 Recall the stored zoom position.
Press any of the buttons assigned with the
0
"Preset Zoom1", "Preset Zoom2", or "Preset
Zoom3" function and release within 1
second.
The camera recorder zooms to the stored
0
zoom position.
Memo :
To recall the stored zoom position, set the
0
[ZOOM SERVO/MANUAL] switch to "SERVO".
The zoom speed to the zoom position can be set
0
with [Main Menu] B [Camera Function] B
[Preset Zoom Speed].
(A P92 [ Preset Zoom Speed ] )
Operating other zoom maneuvers during a
0
zoom position recall will cancel the recall.

Focus Operation

Adjusting Focus Manually
.
1 Set the [FOCUS AUTO/MANU/∞] switch to
"MANU".
The manual focus icon d appears on the
screen.
4030 20 10 0
P 13000K
.
Memo :
If [Main Menu] B [LCD/VF] B [Display
0
Settings] B [Focus] is set to "Off", the d icon will
not appear.
(A P99 [ Focus ] )
2 Turn the focus ring to adjust the focus.
Memo :
Using the Focus Assist function makes it easier
0
to focus.
(A P46 [Focus Assist Function] )
FOCUS
FOCUS ASSIST/1
AUTO
TIME CODE
MANU
PUSH AUTO
00: 00: 00.00
Jan 24 ,2012
12 :34 : 56
5 . 6f t
ND 1 /64
AE 6
+
0
dB
F1.6
1/ 100
45