Focus Operation F - JVC GY-HM890U Instructions Manual

1 Assign the "Preset Zoom1", "Preset
Zoom2", or "Preset Zoom3" function to any
of the user buttons.
* This excludes the [AUTO FOCUS/11] button.
(A P42 [Assignment of Functions to User
Buttons] )
(A P111 [USER1 to USER11, Lens RET] )
2 Save the current zoom position.
Press any of the buttons assigned with the
0
"Preset Zoom1", "Preset Zoom2", or "Preset
Zoom3" function for more than 1 second.
The current zoom position will be stored.
0
3 Recall the stored zoom position.
Press any of the buttons assigned with the
0
"Preset Zoom1", "Preset Zoom2", or "Preset
Zoom3" function and release within 1
second.
The camera recorder zooms to the stored
0
zoom position.
Memo :
To recall the stored zoom position, set the
0
[ZOOM SERVO/MANUAL] switch to "SERVO".
The speed to zoom to the zoom position can be
0
set with [Main Menu] B [Camera Function] B
[Preset Zoom Speed].
(A P112 [ Preset Zoom Speed F ] )
Operating other zoom maneuvers during a
0
zoom position recall will cancel the recall.

Focus Operation F

Adjusting Focus Manually
.
1 Set the [AUTO FOCUS/11] switch to "OFF".
The manual focus icon d appears on the
screen.
The handle zoom lever operates only when the
supplied lens is in use.
.
Memo :
If [Main Menu] B [LCD/VF] B [Display Settings]
0
B [Focus] is set to "Off", the d icon will not
appear.
(A P122 [ Focus F ] )
2 Turn the focus ring to adjust the focus.
Memo :
Using the Focus Assist or Expanded Focus
0
function makes it easier to focus.
(A P55 [Focus Assist Function] )
(A P55 [Expanded Focus Function] )
Even while in the Manual Focus mode, pressing
0
the [RET] button on the lens or the user button
assigned with the "One Push Focus" function
switches the camera recorder to the One-push
Autofocus mode.
00: 00: 00.00
Jan 24 , 2014
12 :34 : 56
5 . 6f t
ND 1 /64
AE 6
+
0
dB
F1. 6
P 13000K 1/ 100
Zoom Operation
53