Record Set Item - JVC GY-HC900CHE Instructions Manual

Record Set Item

Record Format
After setting of all items in the [Record Format]
menu is complete, select [Set] at the bottom of the
screen to apply the new settings on the camera
recorder and switch the recording format. A
"Please Wait..." message appears during
switching.
9 System
For selecting a system definition.
HD EXT (SSD):
0
Records videos in "HD EXT" quality to
[Expansion slot] (SSD media).
HD:
0
Records in "HD" (High Definition) quality for both
slots A and B.
SD:
0
Records in "SD" (Standard Definition) quality for
both slots A and B.
HD+Web:
0
Records in "HD" (high definition) for slot A, and
in resolution suitable for web distribution for slot
B.
HD(SDI In):
0
Records the HD SDI video of the device
connected to the [HD/SD SDI IN] terminal in
"HD" to both slot A and slot B.
SD(SDI In):
0
Records the SD SDI video of the device
connected to the [HD/SD SDI IN] terminal in
"SD" to both slot A and slot B.
High-Speed:
0
Records slow motion videos in "HD" (High
Definition) for both slot A and slot B.
[Setting Values: HD EXT(SSD), RHD, SD, HD
+Web, HD(SDI In), SD(SDI In), High-Speed]
Caution :
The selectable options for the [WFormat]/[
0
Format], [WResolution]/[
[WFrame Rate]/[
[ Bit Rate][WAudio]/[
[YFormat], [YResolution], [YFrame Rate],
[YBit Rate] and [YAudio] settings vary
depending on the setting of this item.
When [System] B [Record Set] B [Record
0
Format] B [System] is configured to "High-
Speed", network cannot be used via wireless
LAN u v or the [HOST] terminal (USB).
Configure as follows in this case.
Set [Network] B [Connection Setup] B [USB/
0
Int. WLAN] to "Off". u v
Unplug the USB network adapter
0
Note that camera operation will come to an
emergency stop and the power will turn off if the
above steps are not performed.
File data may be damaged if this happens while
recording is in progress.
160
System Menu
Resolution],
Frame Rate], [WBit Rate]/
Audio],
Format
9 WFormat/
For selecting the format of the file to be recorded to
the recording media in slot A or Expansion slot.
QuickTime(MPEG2):
0
QuickTime file format (.MOV)
MXF(MPEG2):
0
MXF file format
QuickTime(H.264):
0
QuickTime file format (.MOV)
Exchange: (U model only)
0
Sports Video Interop Group format
MP4(H.264): (E model only)
0
MP4 file format
[Setting Values: QuickTime(MPEG2),
MXF(MPEG2), RQuickTime(H.264), Exchange]
(U model only)
[Setting Values: QuickTime(MPEG2),
MXF(MPEG2), RQuickTime(H.264), MP4(H.264)]
(E model only)
Memo :
When [System] is set to "HD EXT(SSD)", this
0
item is fixed at "ProRes".
When [System] is set to "SD" or "SD(SDI In)",
0
this item is fixed at "QuickTime(H.264)".
When [System] is set to "HD+Web", this item is
0
fixed at "QuickTime(H.264)".
When [System] is set to "High-Speed", this item
0
is fixed at "QuickTime(H.264)".
Exchange (U model) and MP4(H.264) (E model)
0
are selectable only when [System] is configured
to "HD" or "HD(SDI In)".
Exchange format is used under license from
0
Sports Video Interoperability Group, Inc..