Table of Contents
Advertisement
A/V Set Menu
Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
(A P103 [Video Set Item] )
Audio Set...
For specifying audio-related settings.
(A P104 [Audio Set Item] )
Video Set Item
Display On TV
For setting whether to display the display and menu
characters on the external monitor.
[Setting Values: On, ROff]
HDMI/SDI Out
For setting the terminal to output the video.
[Setting Values: HDMI+SDI, SDI, HDMI, ROff]
9 Resolution
For selecting the resolution of video output from the
[HDMI] terminal or [SDI OUT] terminal according to
the monitor to be connected.
[Setting Values: 576i, 576p, 480i, 480p, 720p,
1080i, 1080p, 2160/24p, 2160/25p, 2160/30p]
Memo :
The selectable options vary according to the
0
setting in [System]/[WResolution] and [WFrame
Rate] of [System] B [Record Set] B [Record
Format].
Cross conversion output is not possible.
0
This item cannot be specified when HDMI/SDI
0
Out is set to "Off".
9 HDMI Color
For setting the color format of HDMI signals.
0
This item is selectable when [HDMI/SDI Out] is
0
set to "HDMI" or "HDMI+SDI".
[Setting Values: RGB, RAuto]
9 HDMI Enhance
For setting the color range of HDMI signals.
0
When connecting to a PC monitor, set this to
"On".
This item is selectable when [HDMI/SDI Out] is
0
set to "HDMI" or "HDMI+SDI".
[Setting Values: On, ROff]
9 SDI Rec Trigger
For setting whether to superimpose trigger signals
in tandem with the [SDI OUT] terminal as well as
the [REC] button on the camera body.
If "On" is specified, it is possible to record on a
device equipped with SDI record trigger in tandem
with the operation of the [REC] button.
When a compatible device is connected,
recording/stop control signals are output in tandem
with the operation of the [REC] button.
The SDI record trigger output status to the
connected device is indicated by REC B/STBY B
on the display screen.
[Setting Values: On, ROff]
Memo :
Even if REC B/STBYB is displayed on the
0
display screen, the compatible device may not
necessarily be recording.
SD Aspect
For setting the style of displaying images with a
16:9 aspect ratio on a 4:3 aspect ratio screen.
Letter:
0
Displays as a wide image with the top and
bottom blackened.
Squeeze:
0
Displays image that is squeezed horizontally.
[Setting Values: Letter, RSqueeze]
Memo :
When [Record Format] B [System] is set to
0
"SD", and [Record Format] B [SD Aspect] is set
to "4:3", "---" is displayed and selection is
disabled.
(A P108 [ System ] )
SD Set Up
For selecting whether to add a setup signal to the
video signal output from the [AV] output terminal.
Setup signals are added when "7.5%" is selected.
[Setting Values: 7.5%, R0.0%]
Memo :
Depending on the menu settings of the camera
0
recorder and the condition of the cable
connected to it, the setup signal setting may be
fixed at "0.0%". "0.0%" is displayed in gray in this
case.
When [Main Menu] B [System] B [Record Set]
0
B [Record Format]B[Frame Rate] is set to "50p"
or "50i", "---" is displayed and selection is
disabled.
103
A/V Set Menu
Advertisement
Table of Contents
