Monitoring Flex Links And The Mac Address-Table Move Update - Cisco 3845 - Security Bundle Router Software Manual

Chapter 17 Configuring Flex Links and the MAC Address-Table Move Update Feature
Rcv last sequence# this min : 0
Rcv last interface : Po2
Rcv last src-mac-address : 000b.462d.c502
Rcv last switch-ID : 0403.fd6a.8700
Xmt packet count : 0
Xmt packet count this min : 0
Xmt threshold exceed count : 0
Xmt pak buf unavail cnt : 0
Xmt last interface : None
Beginning in privileged EXEC mode, follow these steps to configure a switch to get and process MAC
address-table move update messages:
Command
Step 1
configure terminal
Step 2
mac address-table move update receive
Step 3 end
Step 4 show mac address-table move update
Step 5 copy running-config startup config
To disable the MAC address-table move update feature, use the no mac address-table move update
receive configuration command. To display the MAC address-table move update information, use the
show mac address-table move update privileged EXEC command.
This example shows how to configure a switch to get and process MAC address-table move update
messages:
Switch# configure terminal
Switch(conf)# mac address-table move update receive
Switch(conf)# end
Monitoring Flex Links and the MAC Address-Table Move
Update
Table 17-1
Table 17-1 Flex Link Monitoring Command
Command
show interface [interface-id] switchport
backup
show mac address-table move update
OL-23400-01
Purpose
Enter global configuration mode.
Enable the switch to get and process the MAC address-table move
updates.
Return to privileged EXEC mode.
Verify the configuration.
(Optional) Save your entries in the switch startup configuration file.
shows the privileged EXEC command for monitoring Flex Link configuration.
Purpose
Displays the Flex Link backup interface configured for an interface, or displays
all Flex Links configured on the switch and the state of each active and backup
interface (up or standby mode).
Displays the MAC address-table move update information on the switch.

Monitoring Flex Links and the MAC Address-Table Move Update

Cisco ME 3800X and 3600X Switch Software Configuration Guide
17-13