Cisco 3825 - Voice Bundle Router Troubleshooting Manual
Cisco 3825 - Voice Bundle Router Troubleshooting Manual

Cisco 3825 - Voice Bundle Router Troubleshooting Manual

Troubleshooting guide
Hide thumbs Also See for 3825 - Voice Bundle Router:

Advertisement

Troubleshooting Cisco 3800 Series Routers
Your Cisco 3800 series integrated services router goes through extensive testing and burn-in before
leaving the factory. If you encounter problems, use this document to help isolate problems or to eliminate
the router as the source of the problem.
This document contains the following sections:
Solving Problems, page 2
LEDs, page 5
The show environment Command, page 9
Error Messages, page 10
Jumper Settings, page 12
Recovering a Lost Password, page 13
More Troubleshooting Help, page 13
To troubleshoot network modules, see the
Note
troubleshoot interface cards, see the
available on Cisco.com.
If you cannot find the source of the problem, contact a customer service representative. For information
about obtaining technical support, see the
"Introduction to Cisco 3800 Series Routers Hardware
following information ready:
Router type and serial number (for serial number locations, see the
on page 5
Maintenance agreement or warranty information
Type of software and version number
Date you received the router
Brief description of the problem
Brief explanation of the steps taken to isolate the problem
OL-5972-01
Cisco Interface Cards Installation
of
"Overview of Cisco 3800 Series
Cisco Network Modules Hardware Installation
"Obtaining Technical Assistance" section on page 12
Documentation." Before you call, have the
Routers")
Troubleshooting Cisco 3800 Series Routers
Guide. To
Guide. These documents are
of
"Product Identification" section
1

Advertisement

Table of Contents
loading

Summary of Contents for Cisco 3825 - Voice Bundle Router

  • Page 1 Troubleshooting Cisco 3800 Series Routers Your Cisco 3800 series integrated services router goes through extensive testing and burn-in before leaving the factory. If you encounter problems, use this document to help isolate problems or to eliminate the router as the source of the problem.
  • Page 2: Solving Problems

    Both the system power LED and the fans can help you troubleshoot a power problem. Check the following items. The Cisco 3845 router has two system power LEDs, one for each power supply, labeled SYS PWR1 and Note SYS PWR2.
  • Page 3: Environmental Reporting Features

    – If no, check the fans. – With the power switch on and the SYS PWR LED (Cisco 3825) or SYS PWR1 or SYS PWR2 LED • (Cisco 3845) off, do the fans operate? If yes, the router is receiving power. The fans are connected directly to the DC outputs of the –...
  • Page 4: Troubleshooting Modules, Cables, And Connections

    Guide and the Cisco Interface Cards Installation Guide. Make sure that you have a version of Cisco IOS software that supports the network module or – interface card. To determine which Cisco IOS releases support your router, network modules, and interface cards, go to the Software Advisor at http://tools.cisco.com/Support/Fusion/. You must have an account on Cisco.com.
  • Page 5 Cisco 3825 router. Figure 3 Figure 4 show the LEDs on the Cisco 3845 router. Each power supply in a Cisco 3845 router also has its own LED. For an explanation of these LEDs, see Table Figure 1...
  • Page 6 100 0 21x 3x Bas e-T 20x 2x -48 V 15x 7x 14x 6x 10/1 00/ 13x 5x 100 0 12x 4x Bas e-T 11x 3x 10x 2x Figure 3 Cisco 3845 Front-Panel LEDs Troubleshooting Cisco 3800 Series Routers OL-5972-01...
  • Page 7 LEDs Figure 4 Cisco 3845 Router Rear-Panel LEDs GigE 0/1 PVDM 3 PVDM 2 PVDM 1 PVDM 0 AIM 1 AIM 0 GigE 0/0 CO NSO Gig E 0/1 PVD M 3 PVD M 2 PVD M 1 PVD M 0...
  • Page 8 LEDs Table 1 Cisco 3800 Series LED Indicators (continued) 3825 3845 Color and State Meaning AUX PWR Front — IP phone power off or not present, or power-up not completed Steady green Present and enabled (power-up completed) Amber Powered but malfunctioning AUX PWR1 —...
  • Page 9: The Show Environment Command

    The show environment command can help you monitor and troubleshoot router power and ventilation status. This is an example of the output of the show environment command for a Cisco 3825 router with an AC power supply and no Redundant Power System: Router# show environment Redundant Power System is not present.
  • Page 10: Error Messages

    Error Messages This is an example of the output of the show environment command for a Cisco 3845 router that has one AC power supply with IP phone power output installed: Router# show environment SYS PS1 is present Fan status: Normal...
  • Page 11 Cisco 3845 Router Error Messages The Cisco 3845 router supports two internal power supplies and returns the following error messages for them. Error Message System detected SYS PS 1|2 input voltage fail condition. Power to the indicated power supply has failed.
  • Page 12: Jumper Settings

    Multiple failures have occurred in the indicated power supply. This message can also Explanation appear if you have installed two power supplies in a Cisco 3845 router, but only one is powered on. If the power supply is turned off, turn it on. If it has failed, replace it. See Recommended Action “Installing and Upgrading Internal Components in Cisco 3800 Series...
  • Page 13: Recovering A Lost Password

    Recovering a Lost Password The jumpers are not needed to troubleshoot Cisco IOS problems. If the Cisco IOS software becomes Note corrupted, remove the CompactFlash memory card to force the router to boot in ROM monitor mode. Change these settings only after consulting with your service representative or Cisco technical support.
  • Page 14 More Troubleshooting Help Troubleshooting Cisco 3800 Series Routers OL-5972-01...

This manual is also suitable for:

3845 - security bundle router3800 series

Table of Contents