Modifying The Startup Configuration - Cisco 3845 - Security Bundle Router Software Manual

Chapter 3 Assigning the Switch IP Address and Default Gateway
ip classless
ip http server
!
!
line con 0
speed 115200
line vty 5 15
!
End
To store the configuration or changes you have made to your startup configuration in flash memory, enter
this privileged EXEC command:
Switch# copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
This command saves the configuration settings that you made. If you fail to do this, your configuration
will be lost the next time you reload the system. To display information stored in the NVRAM section
of flash memory, use the show startup-config or more startup-config privileged EXEC command.
For more information about alternative locations from which to copy the configuration file, see
Appendix B, "Working with the Cisco IOS File System, Configuration Files, and Software Images."

Modifying the Startup Configuration

•
•
•
•
•
See also
Images,"
OL-23400-01
Default Boot Configuration, page 3-18
Automatically Downloading a Configuration File, page 3-18
Booting Manually, page 3-19
Booting a Specific Software Image, page 3-19
Controlling Environment Variables, page 3-20
Appendix B, "Working with the Cisco IOS File System, Configuration Files, and Software
for information about switch configuration files.
Cisco ME 3800X and 3600X Switch Software Configuration Guide
Modifying the Startup Configuration
3-17