Cisco 3845 - Security Bundle Router Software Manual page 167

Chapter 8 Configuring Switch-Based Authentication
Command
Step 3
aaa authentication login {default |
list-name} method1 [method2...]
Step 4 line [console | tty | vty] line-number
[ending-line-number]
OL-23400-01
Purpose
Create a login authentication method list.
To create a default list that is used when a named list is not specified
•
in the login authentication command, use the default keyword
followed by the methods that are to be used in default situations. The
default method list is automatically applied to all ports.
For list-name, specify a character string to name the list you are
•
creating.
• For method1..., specify the actual method the authentication
algorithm tries. The additional methods of authentication are used
only if the previous method returns an error, not if it fails.
Select one of these methods:
enable—Use the enable password for authentication. Before you
–
can use this authentication method, you must define an enable
password by using the enable password global configuration
command.
group radius—Use RADIUS authentication. Before you can use
–
this authentication method, you must configure the RADIUS
server. For more information, see the
Server Host" section on page
line—Use the line password for authentication. Before you can
–
use this authentication method, you must define a line password.
Use the password password line configuration command.
– local—Use the local username database for authentication. You
must enter username information in the database. Use the
username name password global configuration command.
local-case—Use a case-sensitive local username database for
–
authentication. You must enter username information in the
database by using the username password global configuration
command.
none—Do not use any authentication for login.
–
Enter line configuration mode, and configure the lines to which you want
to apply the authentication list.
Cisco ME 3800X and 3600X Switch Software Configuration Guide
Controlling Switch Access with RADIUS
"Identifying the RADIUS
8-20.
8-23