Monitoring Flex Links And The Mac Address-Table Move Update Information - Cisco WS-C3020 Software Configuration Manual

Chapter 19 Configuring Flex Links and the MAC Address-Table Move Update Feature
This example shows how to configure a switch to get and process MAC address-table move update
messages:
Switch# configure terminal
Switch(conf)# mac address-table move update receive
Switch(conf)# end
Monitoring Flex Links and the MAC Address-Table Move
Update Information
Table 19-1
MAC address-table move update information.
Table 19-1 Flex Links and MAC Address-Table Move Update Monitoring Commands
Command
show interface [interface-id]
switchport backup
show mac address-table move update Displays the MAC address-table move update information on the switch.
OL-8915-03
shows the privileged EXEC commands for monitoring the Flex Links configuration and the
Purpose
Displays the Flex Link backup interface configured for an interface or all the
configured Flex Links and the state of each active and backup interface (up or
standby mode).
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide

Monitoring Flex Links and the MAC Address-Table Move Update Information

19-11