Cisco 3845 - Security Bundle Router Software Manual page 715

Chapter 32 Configuring Ethernet OAM, CFM, and E-LMI
Command
Step 3
type echo domain domain-name vlan vlan-id
[exclude-mpids mp-ids]
or
type jitter domain domain-name vlan vlan-id
[exclude-mpids mp-ids] [interval
interpacket-interval] [num-frames number-of frames
transmitted]
Step 4
cos cos-value
Step 5
owner owner-id
Step 6
request-data-size bytes
Step 7
tag text
Step 8 threshold milliseconds
Step 9
timeout milliseconds
Step 10 exit
OL-23400-01
Purpose
Configure the automatic Ethernet operation to create echo
(ping) or jitter operation and enter IP SLAs Ethernet echo
configuration mode.
Enter type echo for a ping operation or type jitter for
•
a jitter operation.
For mpid identifier, enter a maintenance endpoint
•
identifier. The range is 1 to 4094.
• For domain domain-name, enter the CFM domain
name.
• For vlan vlan-id, the VLAN range is from 1 to 4095.
• (Optional) Enter exclude-mpids mp-ids to exclude the
specified maintenance endpoint identifiers.
(Optional—for jitter only) Enter the interval between
•
sending of jitter packets.
(Optional—for jitter only) Enter the num-frames and
•
the number of frames to be sent.
(Optional) Set a class of service value for the operation.
(Optional) Configure the SNMP owner of the IP SLAs
operation.
(Optional) Specify the protocol data size for an IP SLAs
request packet. The range is from 0 to the maximum size
allowed by the protocol being used; the default is 66 bytes.
(Optional) Create a user-specified identifier for an IP SLAs
operation.
(Optional) Specify the upper threshold value in
milliseconds for calculating network monitoring statistics.
The range is 0 to 2147483647; the default is 5000.
(Optional) Specify the amount of time in milliseconds that
the IP SLAs operation waits for a response from its request
packet. The range is 0 to 604800000; the default value is
5000.
Return to global configuration mode.
Cisco ME 3800X and 3600X Switch Software Configuration Guide
Configuring Ethernet CFM
32-19