Cisco 3845 - Security Bundle Router Software Manual page 906

Working with Software Images
Command
Step 5
end
Step 6
archive upload-sw
rcp:[[[//[username@]location]/directory]/image-na
me.tar]
The archive upload-sw privileged EXEC command builds an image file on the server by uploading these
files in order: info, the Cisco IOS image, and the web management files. After these files are uploaded,
the upload algorithm creates the tar file format.
Caution For the download and upload algorithms to operate properly, do not rename image names.
Cisco ME 3800X and 3600X Switch Software Configuration Guide
B-36
Appendix B Working with the Cisco IOS File System, Configuration Files, and Software Images
Purpose
Return to privileged EXEC mode.
Upload the currently running switch image to the RCP
server.
• For //username, specify the username; for the RCP copy
request to execute, an account must be defined on the
network server for the remote username. For more
information, see the
an Image File By Using RCP" section on page
For @location, specify the IP address of the RCP server.
•
For /directory]/image-name.tar, specify the directory
•
(optional) and the name of the software image to be
uploaded. Directory and image names are case sensitive.
• The image-name.tar is the name of software image to be
stored on the server.
"Preparing to Download or Upload
OL-23400-01
B-32.