Controlling Switch Access With Tacacs; Understanding Tacacs - Cisco 3845 - Security Bundle Router Software Manual

Controlling Switch Access with TACACS+

Controlling Switch Access with TACACS+

This section describes how to enable and configure Terminal Access Controller Access Control System
Plus (TACACS+), which provides detailed accounting information and flexible administrative control
over authentication and authorization processes. TACACS+ is facilitated through authentication,
authorization, accounting (AAA) and can be enabled only through AAA commands.
For complete syntax and usage information for the commands used in this section, see the Cisco IOS
Note
Security Command Reference, Release 12.2.
•
•
•
•

Understanding TACACS+

TACACS+ is a security application that provides centralized validation of users attempting to gain access
to your switch. TACACS+ services are maintained in a database on a TACACS+ daemon typically
running on a UNIX or Windows NT workstation. You should have access to and should configure a
TACACS+ server before the configuring TACACS+ features on your switch.
TACACS+ provides for separate and modular authentication, authorization, and accounting facilities.
TACACS+ allows for a single access control server (the TACACS+ daemon) to provide each
service—authentication, authorization, and accounting—independently. Each service can be tied into its
own database to take advantage of other services available on that server or on the network, depending
on the capabilities of the daemon.
The goal of TACACS+ is to provide a method for managing multiple network access points from a single
management service. Your switch can be a network access server along with other Cisco routers and
access servers. A network access server provides connections to a single user, to a network or
subnetwork, and to interconnected networks as shown in
Cisco ME 3800X and 3600X Switch Software Configuration Guide
8-10
Understanding TACACS+, page 8-10
TACACS+ Operation, page 8-12
Configuring TACACS+, page 8-12
Displaying the TACACS+ Configuration, page 8-17
Chapter 8 Configuring Switch-Based Authentication
Figure 8-1.
OL-23400-01