Vmps Reconfirm (Global Configuration) - Cisco 4500M Command Reference Manual

vmps reconfirm (global configuration)

vmps reconfirm (global configuration)
To change the reconfirmation interval for the VLAN Query Protocol (VQP) client, use the vmps
reconfirm command. To return to the default setting, use the no form of this command.
Syntax Description
interval
Defaults
The reconfirmation interval is 60 minutes.
Command Modes
Global configuration
Command History Release
12.1(13)EW
Examples
This example shows how to set the VQP client to reconfirm dynamic VLAN entries every 20 minutes:
Switch(config)# vmps reconfirm 20
Switch(config)#
You can verify your setting by entering the show vmps command and examining information in the
Reconfirm Interval row.
Related Commands
show vmps
vmps reconfirm (privileged EXEC)
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-504
vmps reconfirm interval
no vmps reconfirm
Queries to the VLAN Membership Policy Server (VMPS) to reconfirm dynamic
VLAN assignments; valid values are from 1 to 120 minutes.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01