Show Interfaces Status - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show interfaces status

To display interface status or a list of interfaces in error-disabled state, use the show interfaces status
command.
Syntax Description
err-disabled
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
Examples
This example shows how to display the status of all interfaces:
Switch# show interfaces status
Port
Gi1/1
Gi1/2
Fa5/1
Fa5/2
Fa5/3
Fa5/4
...
Fa5/15
Fa5/16
Fa5/17
Switch#
This example shows how to display the status of interfaces in error-disabled state:
Switch# show interfaces status err-disabled
Port
Fa9/4
informational error message when the timer expires on a cause
--------------------------------------------------------------
5d04h:%PM-SP-4-ERR_RECOVER:Attempting to recover from link-flap err-disable state on Fa9/4
Switch#
Related Commands
errdisable detect
show errdisable recovery
78-16201-01
show interfaces status [err-disabled]
(Optional) Displays interfaces in error-disabled state.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Name
Name
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
Status Vlan Duplex Speed Type
disabled routed
notconnect 1
disabled routed
disabled routed
disabled routed
disabled routed
disabled routed
disabled routed
disabled routed
Status Reason
notconnect link-flap
show interfaces status
full 1000 missing
full 1000 unknown (4)
auto auto 10/100BaseTX
auto auto 10/100BaseTX
auto auto 10/100BaseTX
auto auto 10/100BaseTX
auto auto 10/100BaseTX
auto auto 10/100BaseTX
auto auto 10/100BaseTX
2-285