Qos (Interface Configuration Mode) - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

qos (interface configuration mode)

To enable QoS functionality on an interface, use the qos command. To disable QoS functionality on an
interface, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
QoS is enabled.
Command Modes
Interface configuration
Command History Release
12.1(8a)EW
Usage Guidelines
If QoS functionality is globally disabled, it is also disabled on all interfaces.
Examples
This example shows how to enable QoS functionality on an interface:
Switch(config-if)# qos
Switch(config-if)#
Related Commands
show qos
qos (global configuration mode)
78-16201-01
qos
no qos
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
qos (interface configuration mode)
2-209