Cisco 4500M Command Reference Manual page 302

show idprom
FRU Major Type = 0x4201
FRU Minor Type = 303
OEM String = Cisco Systems, Inc.
Product Number = WS-X4306
Serial Number = 00000135
Part Number = <tbd>
Hardware Revision = 0.2
Manufacturing Bits = 0x0000
Engineering Bits = 0x0000
Snmp OID = 0.0.0.0.0.0.0.0
Power Consumption = 0
RMA Failure Code = 0 0 0 0
Linecard Block Signature = 0x4201
Linecard Block Version = 1
Linecard Block Length = 24
Linecard Block Checksum = 658
Feature Bits = 0x0000000000000000
Card Feature Index = 50
MAC Base = 0010.7bab.9830
MAC Count = 6
Switch#
This example shows how to display IDPROM information for the GBICs on the Gigabit Ethernet
interface 1/2:
Switch# show idprom interface GigabitEthernet 1/ 2
GBIC Serial EEPROM Contents:
Common Block:
Identifier
Extended Id
Connector
Transceiver
Speed
Media
Technology
Link Length
GE Comp Codes
SONET Comp Codes = Not available [0x0]
Encoding
BR, Nominal
Length(9u) in km
Length(9u)
Length(50u)
Length(62.5u)
Length(Copper)
Vendor name
Vendor OUI
Vendor Part No.
Vendor Part Rev.
Wavelength
CC_BASE
Extended ID Fields
Options
implemented and disables the serial output
BR, max
BR, min
Vendor Serial No. = K1273DH
Date code
Diag monitoring
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-270
Chapter2
= GBIC [0x1]
= Not specified/compliant with defined MOD_DEF [0x0]
= SC connector [0x1]
= Not available [0x0]
= Not available [0x0]
= Not available [0x0]
= Not available [0x0]
= Not available [0x0]
= 8B10B [0x1]
= 1300000000 MHz
= GBIC does not support single mode fibre, or the length
must be determined from the transceiver technology.
= > 25.4 km
= GBIC does not support 50 micron multi-mode fibre, or the
length must be determined from the transceiver technology.
= GBIC does not support 62.5 micron multi-mode fibre, or
the length must be determined from transceiver technology.
= GBIC does not support copper cables, or the length must
be determined from the transceiver technology.
= CISCO-FINISAR
= 36965
= FTR-0119-CSC
= B
= Not available
= 0x1A
= Loss of Signal implemented TX_FAULT signal implemented TX_DISABLE is
= Unspecified
= Unspecified
= 030409
= Implemented
Cisco IOS Commands for the Catalyst 4500 Series Switches
[0x1A]
78-16201-01