Chapter2
Cisco IOS Commands for the Catalyst 4500 Series Switches
Command History
Release
12.1(13)EW
Examples
This example shows how to enable DBL globally on the switch:
Switch(config)# qos dbl
Global DBL enabled
Switch(config)#
This example shows how to enable DBL in the QoS policy-map class configuration mode:
Switch(config)# class-map c1
Switch(config-cmap)# policy p1
Switch(config-pmap)# class c1
Switch(config-pmap-c)# dbl
Switch(config-pmap-c)#
Related Commands
show qos dbl
78-16201-01
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
qos dbl
2-217