Debug Smf Updates - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

debug smf updates

To debug software MAC filter (SMF) address insertions and deletions, use the debug smf updates
command. To disable debugging output, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
Examples
This example shows how to debug SMF updates:
Switch# debug smf updates
Software MAC filter address insertions and deletions debugging is on
Switch#
Related Commands
undebug smf (same as no debug smf)
78-16201-01
debug smf updates
no debug smf updates
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
debug smf updates
2-65