Show Mac-Address-Table Interface - Cisco 4500M Command Reference Manual

show mac-address-table interface

show mac-address-table interface
To display the MAC address table information for a specific interface, use the show mac-address-table
interface command.
Syntax Description
type
slot/port
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
Usage Guidelines
For MAC address table entries used by routed ports, the routed port name is displayed in the "vlan"
column rather than the internal VLAN number.
Examples
This example shows how to display MAC address table information for a specific interface:
Switch# show mac-address-table interface fa6/16
Unicast Entries
vlan
-------+---------------+--------+---------------------+--------------------
2
2
2
2
2
2
Multicast Entries
vlan
-------+---------------+-------+-------------------------------------------
2
Switch#
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-342
show mac-address-table interface type slot/port
Interface type; valid values are Ethernet, FastEthernet, and GigabitEthernet.
Number of the slot and port.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
mac address type
0000.0000.0101 dynamic other
0000.0000.0102 dynamic other
0000.0000.0103 dynamic other
0000.0000.0104 dynamic other
0000.0000.0105 dynamic other
0000.0000.0106 dynamic other
mac address type
ffff.ffff.ffff system Fa6/16
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
protocols
ports
port
FastEthernet6/16
FastEthernet6/16
FastEthernet6/16
FastEthernet6/16
FastEthernet6/16
FastEthernet6/16
78-16201-01