Dot1X Timeout - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

dot1x timeout

To set the reauthentication timer, use the dot1x timeout command. To return to the default setting, use
the no form of this command.
Syntax Description
reauth-period seconds
quiet-period seconds
tx-period seconds
supp-timeout seconds
server-timeout seconds
Defaults
The default settings are as follows:
•
•
•
•
•
Command Modes
Interface configuration
Command History Release
12.1(12)EW
Usage Guidelines
Periodic reauthentication must be enabled before entering the dot1x timeout re-authperiod command.
Enter the
78-16201-01
dot1x timeout {reauth-period seconds | quiet-period seconds | tx-period seconds |
supp-timeout seconds | server-timeout seconds}
no dot1x timeout {reauth-period | quiet-period | tx-period | supp-timeout | server-timeout}
Number of seconds between reauthentication attempts; valid values are
from 1 to 65535. See "Usage Guidelines" for more information.
Number of seconds the switch remains in the quiet state following a
failed authentication exchange with the client; valid values are from 0 to
65535 seconds.
Number of seconds the switch waits for a response to an
EAP-request/identity frame from the client before retransmitting the
request; valid values are from 15 to 65535 seconds.
Number of seconds the switch waits for the retransmission of
EAP-Request packets; valid values are from 30 to 65535 seconds.
Number of seconds the switch waits for the retransmission of packets by
the backend authenticator to the authentication server; valid values are
from 30 to 65535 seconds.
Reauthentication period is 3600 seconds.
Quiet period is 60 seconds.
Transmission period is 30 seconds.
Supplicant timeout is 30 seconds.
Server timeout is 30 seconds.
Modification
Support for this command was introduced on the Catalyst4500 series switches.
dot1x re-authentication
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
command to enable periodic reauthentication.
dot1x timeout
2-91