Power Supplies Required - Cisco 4500M Command Reference Manual

power supplies required

power supplies required
To configure the power redundancy mode for the Catalyst 4006 (only), use the power supplies required
command. To return to the default power redundancy mode, use the default form of this command or
the power supplies required 2 command.
Syntax Description
1
2
Defaults
2+1 redundancy mode
Command Modes
Global configuration
Command History Release
12.1(11)EW
Usage Guidelines
This command is not supported on a Catalyst4500 series switch.
Examples
This example shows how to set the power supplies required for the chassis to 1:
Switch(config)# power supplies required 1
Switch(config)#
Related Commands
show power
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-202
power supplies required {1 | 2}
default power supplies required
Configures the chassis for 1+1 redundancy mode.
Configures the switch to 2+1 redundancy mode.
Modification
Support for this command was introduced on the Catalyst 4500 series switch
(Catalyst 4006 only).
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01