Cisco 4500M Command Reference Manual page 387

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Source VLANs
Source RSPAN VLAN : Fa6/1
Destination Ports : Fa6/1
Filter VLANs
Filter Types RX : Good
Filter Types TX : None
Dest Rspan Vlan : 901
Ingress : Enabled, default VLAN=2
Learning : Disabled
Switch#
This example shows how to display SPAN information for session 1 beginning with the line that starts
with Destination:
Switch# show monitor session 1 | begin Destination
Destination Ports: None
Filter VLANs:
Switch#
Switch#
Related Commands
monitor session
78-16201-01
TX Only : None
Both : Gi1/1, CPU
:
RX Only : None
TX Only : None
Both : None
Encapsulation : DOT1Q
Ingress : Enabled, default VLAN = 2
: None
None
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
show monitor
2-355