Cisco 4500M Command Reference Manual page 448

snmp-server enable traps
The following is a list of the MIBs used for the traps:
•
•
•
•
•
•
•
Examples
This example shows how to send all traps to the host specified by the name myhost.cisco.com, using the
community string defined as public:
Switch(config)# snmp-server enable traps
Switch(config)# snmp-server host myhost.cisco.com public
Switch(config)#
Related Commands
Refer to Cisco IOS documentation for additional snmp-server enable traps commands.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-416
flash—Controls SNMP FLASH traps from the CISCO-FLASH-MIB.
–
insertion—Controls the SNMP Flash insertion trap notifications.
–
removal—Controls the SNMP Flash removal trap notifications.
fru-ctrl— Controls the FRU control traps from the CISCO-ENTITY-FRU-CONTROL-MIB.
port-security—Controls the port-security traps from the CISCO-PORT-SECURITY-MIB.
stpx—Controls all the traps from the CISCO-STP-EXTENSIONS-MIB.
vlancreate—Controls SNMP VLAN created trap notifications.
vlandelete— Controls SNMP VLAN deleted trap notifications.
vtp—Controls the VTP traps from the CISCO-VTP-MIB.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01