Vmps Retry - Cisco 4500M Command Reference Manual

vmps retry

vmps retry
To configure the per-server retry count for the VLAN Query Protocol (VQP) client, use the vmps retry
command. To return to the default setting, use the no form of this command.
Syntax Description
count
Defaults
The retry count is 3.
Command Modes
Global configuration
Command History Release
12.1(13)EW
Usage Guidelines
You can verify your setting by entering the show vmps command and examining information in the
Server Retry Count row.
Examples
This example shows how to set the retry count to 7:
Switch(config)# vmps retry 7
Related Commands
show vmps
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-506
vmps retry count
no vmps retry
Number of attempts to contact the VLAN Membership Policy Server (VMPS) by the
client before querying the next server in the list; valid values are from 1 to 10.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01