Testing Driver Installation - Pitney Bowes DocuMatch Integrated Mail System Application Notes

Host Software Installation Notes for Windows 95, continued
Testing Driver
Installation
DocuMatch Integrated Mail System
TM
1. Click on the Generate Mail tab.
2. Click on Enter Setup.
3. Select Print Documents, then click on Save As... and
save the job as PRINT.JOB.
4. Click on OK to close the driver setup screen and return
to the DocuMatch Properties window.
5. Click on the General tab and then click on Print Test
Page. A single sheet with information about the driver
should print to the top of the printer.
If the test page does not print or jobs appear to print from
your application but nothing comes out on the DocuMatch,
first make sure that the port selected for the DocuMatch is
correct and that the system is connected to your computer.
Then click on My Computer/ Printers and double-click on
Pitney Bowes DocuMatch. If you have been experimenting
and there are jobs waiting to print, you may want to delete
them. To do this:
1. Select each one and press the Delete key.
2. Click on File and make sure that DocuMatch is the
default printer. If Pause Printing or Work Offline is
selected, click on it to deselect it. Any jobs waiting to
print should now start to print.
NOTE: If the driver is already installed on your system and
you upgrade to Windows 95, the driver may not work
properly after the upgrade. In this case, go to My Com-
puter/ Printers and remove the DocuMatch driver, then
restart Windows and reinstall the driver.
DocuMatch Application Notes
5