Setup At Documatch - Pitney Bowes DocuMatch Integrated Mail System Application Notes

DocuMatch Application Notes
Connecting DocuMatch to a Serial Port, continued
Setup at the
DocuMatch
86
Seral Cable Pinouts
DB9
Female
2
3
4
5
1,6
7
8
1. Turn the power off, then connect the serial cable at
both ends.
2. Turn the power back on.
3. When the system has warmed up and the control
panel reads DocuMatch System Ready, press
System Options. This takes the printer offline.
4. Enter the following commands on the printer control
panel, inside the top cover.
a. Press and hold Menu until CONFIG MENU is
displayed.
b. Press Menu several times, until I/O=PARALLEL
is displayed.
c. Press Select Up until SERIAL is displayed.
d. Press Feeder Select. A * should appear next to
Serial, indicating that it is selected.
e. Press Reset Enter to save the changes. The
printer will now be expecting data on the serial
port at the default speed of 9600 bps. Leave the
speed at 9600 until you have successfully
printed from the PC.
DB25
Male
1 shield
2
3
6,8
7
20
5
4
DocuMatch Integrated Mail System
TM