Advertisement
4. Aligning the label roll.
Press the
Note: If the label does not feed correctly please refer to label
alignment instructions inside the printer top cover.
Tear off the correctly dispensed label.
5. Connecting the printer and
driver download.
Connect your printer to your computer with the USB cable.
7. Manually download the
printer driver.
1. Go to
2. Select Download Drivers for Workstation w1110 Label
Printer in the
3. Select
section.
4. Double click on the Gutenprint 5.2.12-pre4.dmg file.
5. Press Continue.
6. Press Agree and then Continue.
7. Press Install.
8. The installer will prompt you for your Mac administrative
login. Enter your administrator username and password
and select Install Software.
9. When complete, it will say The installation was
successful. Select Close.
10. Select System Preferences from the Apple menu.
11. Open Printers & Scanners.
12. Select the plus sign + and select "Add Printer or
Scanner...".
13. The MAC system will auto-detect the USB connection to
the Performance Series printer(s).
14. Click on "Select Software..." and choose the Datamax-
O'Neil driver.
15. Scroll down the list or, alternatively, you can type
"Datamax" and the driver should display. Select
"Datamax-ONeil w1110-CUPS+Gutenprint v5.2.12-
pre4" and click "OK."
16. Once the driver software is installed, select the "Printer"
tab at the top of the screen, and click on "Print Test
Page" to print a test page.
button and check that the label feeds out correctly.
support.pb.com/workstation
Downloads section.
in the Download your Mac printer driver
Advertisement
