Table of Contents
Advertisement
2 • Getting Started
Windows
Installation
2-8
TCP/IP Driver Installation
1. Make sure the Ethernet cable is connected and your printer is turned
ON.
2. Insert the supplied CD into your CD-ROM drive. The CD will autorun. If it
does not autorun, 'explore' the CD and double click 'setup.htm' to launch
the CD menu.
3. Click either the 'Windows 32-Bit Drivers' or the 'Windows 64-Bit Drivers'
button, as required.
4. Follow the on-screen instructions to copy the drivers to a folder on your
PC (default folder c:\PitneyBowes_dr).
5. Exit the CD menu.
6. On your PC, select [Start] → [Printers and Faxes] then select [Add a
Printer].
7. Select [Local Printer]. Click [Next].
8. Select [Create a New Port] and, from the drop down menu, [Standard
TCP/IP Port]. Click [Next].
9. The TCP/IP Connection wizard will appear. Click [Next].
10. Enter the printer's IP address and port name. Click [Next], then [Finish].
11. At the Install Printer screen, select 'Have Disk'. Browse to the
PitneyBowes_dr folder, and to the actual driver you want (PS, PCL or
PCL6). Click [Next].
12. Follow the on-screen instructions to complete the installation.
Using the LPR Utility to Discover the printer
In order to send documents to the printer, the LPR utility must be installed.
You must manually load the LPR Utility from the Menu Installer on the
supplied CD.
Insert the supplied CD into your CD-ROM drive. The CD will autorun. If it
does not autorun, 'explore' the CD and double click 'setup.htm' to launch the
CD menu.
Click the 'LPR Utility' button, choose 'Run' and the utility will install.
To discover the printer, do the following:
1. Click [Start] → [Programs] → [Xanté] → [Xanté LPR Utility].
2. Click [Remote Print]. Then, click [Add Printer].
3. Select your printer from the drop down list.
4. Enter the IP Address manually or click [Discover] and wait for the printer
to be discovered.
5. Click [OK].
SV62531 Rev. B
Advertisement
Table of Contents
