Advertisement
4. Aligning the label roll.
Press the
Note: If the label does not feed correctly please refer to label
alignment instructions inside the printer top cover.
Tear off the correctly dispensed label.
5. Connecting the printer and
driver download.
Connect your printer to your computer with the USB cable.
Your Printer Driver should automatically download and
install. If this does not happen, please follow step 6 below.
Otherwise continue to step 7.
6. Manually download the
printer driver.
1. Go to
2. Select Download Drivers for Workstation w1110 Label
Printer in the
3. Select
driver section.
4. Select Run or Open dependant on your browser.
5. Accept the licence agreement and follow the on screen
prompts to install.
6. Select Datamax-O'Neil w1110.
7. Continue to follow the on-screen prompts and click
Finish/ Close.
Note: You may need to check your downloads folder to install
Printer Drivers.
button and check that the label feeds out correctly.
support.pb.com/workstation
Downloads section.
in the Download your Windows printer
Advertisement
