Advertisement
Quick Links
Download this manual
See also:
Operator's Manual
AddressRight® DA950 Printer
Installation Instructions
Taking the Printer Out of Box
1. Open the top of the box and remove the accessories.
2. Cut around the bottom of the box.
3. Lift the box off of the printer.
IMPORTANT! Do not attempt to pick the printer up without assistance.
1.
2.
Cut the box (for example, along
the dotted line as shown here).
This document is a publication of Pitney Bowes. The use of this information by the recipient or others for purposes other than the repair, adjustment
or operation of Pitney Bowes equipment may constitute an infringement of patent and/or other intellectual property rights of Pitney Bowes or others.
Pitney Bowes assumes no responsibility for any such use of the information. Except as provided in writing, duly signed by an officer of Pitney Bowes,
no license, either express or implied, under any Pitney Bowes or any third party's patent, copyright, or other intellectual property rights is granted by
providing this information.
SV61184 Rev. B 4/04
©2004 Pitney Bowes Inc.
Remove accessories from
the top of the box.
Installation Instructions
3.
Lift the box off of the printer.
1 Elmcroft Road Stamford, CT 06926-0700
Page 1 of 10
Advertisement
Related Manuals for Pitney Bowes AddressRight DA950
Summary of Contents for Pitney Bowes AddressRight DA950
-
Page 1: Installation Instructions
This document is a publication of Pitney Bowes. The use of this information by the recipient or others for purposes other than the repair, adjustment or operation of Pitney Bowes equipment may constitute an infringement of patent and/or other intellectual property rights of Pitney Bowes or others. -
Page 2: Assembling The Printer
AddressRight® DA950 Printer Installation Instructions Choosing a Location The following environmental consid- erations must be kept in mind when selecting a location for the Address Printer. Doing otherwise may affect the operation and performance of the Ad- dress Printer. 1. Place the printer close enough to the computer for the parallel or USB cable to reach. - Page 3 Installation Instructions AddressRight® DA950 Printer Assembling the 1. Attaching the Feeder Printer (continued) A. Prop the printer cover open. B. Plug the feeder information cable into the receptacle on the printer. C. Lift the feeder and slide the tangs into the slots on the printer. Slots to attach feeder D.
- Page 4 AddressRight® DA950 Printer Installation Instructions Assembling the 2. Installing the Gas Shock Printer A. Insert the screw through the hole on the printer wall and secure with the (continued) bolt provided. B. Snap the shock onto the bolt as shown in the picture at right. C.
- Page 5 Installation Instructions AddressRight® DA950 Printer Assembling the 3. Installing the Side Guides Printer Use the screws provided to attach the right and left side guides to the printer. (continued) Installing the left side guide Installing the right side guide 4. Installing the Feed Ramp A.
- Page 6 AddressRight® DA950 Printer Installation Instructions Assembling the C. Line up the feed ramp on the feeder Printer floor. Reinsert the quick release pin to lock the feed ramp in place. (continued) D. Slide the media support wedge onto the feed ramp. 5.
- Page 7 Installation Instructions AddressRight® DA950 Printer Assembling the USB Cable Printer A. Align the squarer end of the USB cable to the USB port on the printer. Push the cable connector completely in. (continued) B. Align the flatter end of the USB cable to the USB port on the computer or USB hub.
- Page 8 AddressRight® DA950 Printer Installation Instructions Assembling the 7. Installing the Bulk Ink Assembly (Optional) Printer The bulk ink assembly can accommodate up to six ink reservoirs. (continued) A. Assemble the bulk ink assembly. Tighten the nuts around the pre- mounted screws. Tighten nuts around pre-mounted B.
- Page 9 Installation Instructions AddressRight® DA950 Printer Assembling the 4. Gently remove both pieces of tape Printer covering the ink nozzles on the Print Cartridge. Be careful not to touch (continued) the copper nozzles. 5. Raise the latch all the way up on the Head Print Assembly.
- Page 10 AddressRight® DA950 Printer Installation Instructions Assembling the Installing New Bulk Ink Cartridges Printer The bulk ink tray can hold up to six bulk Route cables here ink cartridges; one to hook up to each (continued) of the six print heads. 1.