Zoneset (Configuration Mode) - Cisco MDS 9124 - Fabric Switch Reference

Cisco mds 9000 family command reference - cisco mds san-os release 3.0(1) through 3.3(1a) (ol-16217-01, april 2008)
Hide thumbs Also See for Cisco MDS 9124 - Fabric Switch:
Table of Contents

Advertisement

Chapter 27
Z Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

zoneset (configuration mode)

To group zones under one zone set, use the zoneset command in configuration mode. To negate the
command or revert to the factory defaults, use the no form of the command.
Syntax Description
activate
clone
zoneset-currentName
zoneset-cloneName
name zoneset-name
distribute full
vsan vsan-id
rename
current-name
new-name
Defaults
None.
Command Modes
Configuration mode.
Command History
Release
1.0(2)
2.0(x)
2.1(1a)
Usage Guidelines
Zones are activated by activating the parent zone set.
The zoneset distribute full vsan command distributes the operational values for the default zone to all
zone sets in a VSAN. If you do not want to distribute the operation values, use the system default zone
distribute full command to distribute the default values.The default values are used when you initially
create a VSAN and it becomes active.
OL-16217-01, Cisco MDS SAN-OS Release 3.x
zoneset {activate name zoneset-name vsan vsan-id |
clone zoneset-currentName zoneset-cloneName |
distribute full vsan vsan-id |
name zoneset-name vsan vsan-id |
rename current-name new-name vsan vsan-id}
no zoneset {activate name zoneset-name vsan vsan-id |
clone zoneset-currentName zoneset-cloneName |
distribute full vsan vsan-id |
name zoneset-name vsan vsan-id |
rename current-name new-name vsan vsan-id}
Activates a zone set
Clones a zone set from the current name to a new name. Maximum length
of names is 64 characters.
Specifies a name for a zone set. Maximum length is 64 characters.
Enables zone set propagation.
Activates a zone set on the specified VSAN. The range is 1 to 4093.
Renames a zone set.
Specifies the current fcalias name.
Specifies the new fcalias name.
Modification
This command was introduced.
Added the rename option.
Added the clone option.
zoneset (configuration mode)
Cisco MDS 9000 Family Command Reference
27-23

Advertisement

Table of Contents
loading

Table of Contents