Zone-Attribute-Group Rename - Cisco MDS 9124 - Fabric Switch Reference

zone-attribute-group rename

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
zone-attribute-group rename
To rename a zone attribute group, use the zone-attribute-group rename command in configuration
mode.
Syntax Description current-name
new-name
vsan vsan-id
Defaults
None.
Command Modes
Configuration mode.
Command History Release
2.0(x)
Usage Guidelines None.
Examples
The following example shows how to rename a zone attribute group.
switch# config terminal
switch(config)# zone-attribute-group rename Group1 Group2 vsan 10
Related Commands Command
show zone-attribute-group Displays zone attribute group information.
Cisco MDS 9000 Family Command Reference
27-20
zone attribute group rename current-name new-name vsan vsan-id
Specifies the current zone attribute name. Maximum length is 64 characters.
Specifies the new zone attribute name. Maximum length is 64 characters.
Specifies the VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Chapter 27
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Z Commands