Cisco MDS 9124 - Fabric Switch Reference page 1510

vsan database
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
port-channel
portchannel-number.
subinterface-number
interop
mode
loadbalancing
src-dst-id
src-dst-ox-id
name name
suspend
Defaults
None.
Command Modes Configuration mode.
Command History Release
1.2(2)
3.0(1)
3.1(2)
Usage Guidelines Change to VSAN database submode to issue this command.
The interface range must be in ascending order and non-overlapping. You can specify a range using a
hyphen and several interfaces using commas:
•
•
•
There are four interop modes:
•
•
•
•
Cisco MDS 9000 Family Command Reference
25-10
Modification
This command was introduced.
Increased the interop mode range to 4.
Added the interface bay | ext option.
The interface range format for a FC interface range is
fcslot/port - port , fcslot/port , fcslot/port
(For example,
show int fc1/1 - 3 , fc1/5 , fc2/5
The interface range format for a FV interface range is
fvslot/dpp/fvport - fvport , fvslot/dpp/port , fvslot/dpp/port
(For example,
show int fv2/1/1 - 3 , fv2/1/5 , fv2/2/5
The format for a PortChannel is
port-channel portchannel-number.subinterface-number
(For example,
show int port-channel 5.1
Interop mode 1 - Standards based interop mode that requires all other vendors in the fabric to be in
interop mode.
Interop mode 2 - Brocade native mode (Core PID 0).
Interop mode 3 - Brocade native mode (Core PID 1).
Interop mode 4 - McData native mode.
Configures the PortChannel interface specified by the PortChannel
number followed by a dot (.) indicator and the subinterface number.
Turns on interoperability mode.
Specifies the interop mode. The range is 1 to 4.
Configures load-balancing scheme.
Sets src-id/dst-id for load-balancing.
Sets ox-id/src-id/dst-id for load-balancing (default).
Assigns a name to the VSAN. Maximum length is 32 characters.
Suspends the VSAN.
)
Chapter 25
)
)
OL-16217-01, Cisco MDS SAN-OS Release 3.x
V Commands